Raspberry pi boards and accessories

1/2

		Article number	Name		Price €	(inc. VAT 25%)

SKL00061

Raspberry 4 - B 4GB

74.05

PCS:

Processor: ), (Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz), (Memory: ), (4GB LPDDR4), (Connectivity: ), (2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet ), (2 × USB 3.0 ports ), (2 × USB 2.0 ports.), (GPIO: ), (Standard 40-pin GPIO header (fully backwards-compatible with previous boards)), (Video & sound: ), (- 2 × micro HDMI ports (up to 4Kp60 supported)), (- 2-lane MIPI DSI display port), (-

2-lane MIPI CSI camera port), (- 4-pole stereo audio and composite video port), (Multimedia: ), (- H.265 (4Kp60 decode); ), (- H.264 (1080p60 decode, 1080p30 encode); ), (- OpenGL ES, 3.0 graphics), (SD card support: ), (- Micro SD card slot for loading operating system and data storage), (Input power: ), (- 5V DC via USB-C connector (minimum 3A1)), (- 5V DC via GPIO header (minimum 3A1)), (- Power over Ethernet (PoE)–enabled (requires separate PoE HAT)

ROB00166

Pi-F5 - interface for Raspberry Pi (connector 5.2 x 2.1)

40.78

PCS:

Discount for bigger quantity.

Interface specification: 8 x OUTPUTS (max 600mA), 8 x Digital INPUTS, 4 x Anlogue INPUTS, 2 x SERVO connector (5V), supply connectors (OUT) - 1 x 5V i 1 x 3,3V, 1 x UART connector (TX,RX), 1 x i2C connector, power supply connector for Raspberry and Interface ( 5.2 x 2.1 mm ), 1 x connector for 9V battery ( min. 1800 mA ). Interface dimension 73 x 62 mm. The interface is compatible with all Raspberry models that have a compatible connector with version 3. The adapter requires a min. 2500 mA 9V. VOLTAGE on INPUTS MAX. 9V.

ROB00167

Pi-F5 - interface for Raspberry Pi (connector 3.5 x 1.3)

40.78

PCS:

Discount for bigger quantity.

Interface specification: 8 x OUTPUTS (max 600mA), 8 x Digital INPUTS, 4 x Anlogue INPUTS, 2 x SERVO connector (5V), supply connectors (OUT) - 1 x 5V i 1 x 3,3V, 1 x UART connector (TX,RX), 1 x i2C connector, power supply connector for Raspberry and Interface ( 3.5 x 1.3 mm ), 1 x connector for 9V battery ( min. 1800 mA ). Interface dimension 73 x 62 mm. The interface is compatible with all Raspberry models that have a compatible connector with version 3. The adapter requires a min. 2500 mA 9V. VOLTAGE on INPUTS MAX. 9V.

ROB00202

Pi-T5 - interface for Raspberry Pi (connector 5.2 x 2.1)

35.62

PCS:

Discount for bigger quantity.

). Interface dimension 73 x 62 mm. The interface is compatible with all Raspberry models that have a compatible connector with version 3. The adapter requires a min. 2500 mA 9V. VOLTAGE on INPUTS MAX. 9V. Separate connector (5V) to power the SERVO motor. SERVO motors can also be used with the Raspberry Pi 4 interface.

ROB00203

Pi-T5 - interface for Raspberry Pi (connector 3.5 x 1.3)

35.62

PCS:

Discount for bigger quantity.

ROB00174

X holder V2 for Raspberry Pi 3B, 3B+ (3D print)

4.81

PCS:

ROB00175

X holder V2 for Raspberry Pi 3A, 3A+ (3D print)

4.81

PCS:

ROB00176

X holder V2 for Raspberry Pi Zero (3D print)

4.81

PCS:

ROB00173

X holder V1 for Raspberry Pi 3B, 3B+ (3D print)

4.81

PCS:

ROB00244

ULTRASOUND sensor I2C - (value in mm) 3.3V - 5V

8.66

PCS:

Power supply 3.3V or 5V (red and green). The BLACK wire connects to the SCL connector, and the BLUE to the SDA connector of the I2C port. An example program can be seen in our programming school.

Finde art.nr.:	Articles on page:				1/2