Display showing the battery status ( od 3,5V - 30V )
5.30
ROB00114
Electromagnet 6-9V
9.43
ROB00170
OMNI wheel for 4mm axle ( 64 mm ) complet
8.40
ROB00293
9V Battery clip
0.66
ROB00243
Micro:bit Connector ( 80 pin )
3.50
ROB00128
ULTRASOUND sensor 3.3V - 5V
7.21
Connect red and green wire to 3.3V or 5V power output. Micro:bit connecting: Blue wire (echo) to P3 and black wire (trig) to input P0 . Need to add package "SONAR". For Arduino and Raspberry BLUE wire = ECHO, BLACK wire = TRIG.
ROB00244
ULTRASOUND sensor I2C - (value in mm) 3.3V - 5V
8.66
Power supply 3.3V or 5V (red and green). The BLACK wire connects to the SCL connector, and the BLUE to the SDA connector of the I2C port. An example program can be seen in our programming school.
